Layered PtSe2 for Sensing, Photonic, and (Opto-)Electronic Applications.

Since the first experimental discovery of graphene 16 years ago, many other 2D layered nanomaterials have been reported. However, the majority of 2D nanostructures suffer from relatively complicated fabrication processes that have bottlenecked their development and their uptake by industry for practical applications. Here, the recent progress in sensing, photonic, and (opto-)electronic applications of PtSe2 , a 2D layered material that is likely to be used in industries benefiting from its high air-stability and semiconductor-technology-compatible fabrication methods, is reviewed. The advantages and disadvantages of a range of synthesis methods for PtSe2 are initially compared, followed by a discussion of its outstanding properties, and industrial and commercial advantages. Research focused on the broadband nonlinear photonic properties of PtSe2 , as well as reports of its use as a saturable absorber in ultrafast lasers, are then reviewed. Additionally, the advances that have been achieved in a range of PtSe2 -based field-effect transistors, photodetectors, and sensors are summarized. Finally, a conclusion on these results along with the outlook for the future is presented.

Bacterially synthesized tellurium nanostructures for broadband ultrafast nonlinear optical applications.

Elementary tellurium is currently of great interest as an element with potential promise in nano-technology applications because of the recent discovery regarding its three two-dimensional phases and the existence of Weyl nodes around its Femi level. Here, we report on the unique nano-photonic properties of elemental tellurium particles [Te(0)], as harvest from a culture of a tellurium-oxyanion respiring bacteria. The bacterially-formed nano-crystals prove effective in the photonic applications tested compared to the chemically-formed nano-materials, suggesting a unique and environmentally friendly route of synthesis. Nonlinear optical measurements of this material reveal the strong saturable absorption and nonlinear optical extinctions induced by Mie scattering over broad temporal and wavelength ranges. In both cases, Te-nanoparticles exhibit superior optical nonlinearity compared to graphene. We demonstrate that biological tellurium can be used for a variety of photonic applications which include their proof-of-concept for employment as ultrafast mode-lockers and all-optical switches.

Ultrafast Carrier Dynamics and Bandgap Renormalization in Layered PtSe2.

Carrier interactions in 2D nanostructures are of central importance not only in condensed-matter physics but also for a wide range of optoelectronic and photonic applications. Here, new insights into the behavior of photoinduced carriers in layered platinum diselenide (PtSe2 ) through ultrafast time-resolved pump-probe and nonlinear optical measurements are presented. The measurements reveal the temporal evolution of carrier relaxation, chemical potential and bandgap renormalization in PtSe2 . These results imply that few-layer PtSe2 has a semiconductor-like carrier relaxation instead of a metal-like one. The relaxation follows a triple-exponential decay process and exhibits thickness-dependent relaxation times. This occurs along with a band-filling effect, which can be controlled based on the number of layers and may be applied in saturable absorption for generating ultrafast laser pulses. The findings may provide means to study many-body physics in 2D materials as well as potentially leading to applications in the field of optoelectronics and ultrafast photonics.

Intensity-dependent nonlinear refraction of antimonene dispersions in the visible and near-infrared region.

Antimonene is a stable 2D allotrope of antimony that is predicted to have a direct bandgap, high third-order optical nonlinear susceptibility, and high electron mobility. These properties give it huge potential applications in photonics and optoelectronics. However, the nonlinear refractive response of antimonene dispersions, which is the key to nonlinear refraction-based devices, has not been fully investigated. In this work, we investigated the optical nonlinearities of the antimonene dispersions by spatial self-phase modulation (SSPM) at 405, 785, and 1064 nm wavelengths. The SSPM rings were observed at 405, 785, and 1064 nm, implying the broadband nonlinear optical response of antimonene dispersions from visible to near-infrared. The effective nonlinear refractive index, n2, and the third-order susceptibility, χ(3), of the antimonene dispersion were measured to be ∼10-5 cm2 W-1 and ∼10-8 esu, respectively. Furthermore, the nonlinearity of antimonene was demonstrated to be tuneable by the laser intensities. The relative change of the nonlinear refractive index, Δn2e/n2e, was observed to range from 14% to 63% for different intensities. Our results will be helpful for the photonic applications of antimonene in a broadband wavelength range, such as optical modulators and switchers.

MoS2 /Carbon Nanotube Core-Shell Nanocomposites for Enhanced Nonlinear Optical Performance.

Nanocomposites of layered MoS2 and multi-walled carbon nanotubes (CNTs) with core-shell structure were prepared by a simple solvothermal method. The formation of MoS2 nanosheets on the surface of coaxial CNTs has been confirmed by scanning electron microscopy, transmission electron microscopy, absorption spectrum, Raman spectroscopy, and X-ray photoelectron spectroscopy. Enhanced third-order nonlinear optical performances were observed for both femtosecond and nanosecond laser pulses over a broad wavelength range from the visible to the near infrared, compared to those of MoS2 and CNTs alone. The enhancement can be ascribed to the strong coupling effect and the photoinduced charge transfer between MoS2 and CNTs. This work affords an efficient way to fabricate novel CNTs based nanocomposites for enhanced nonlinear light-matter interaction. The versatile nonlinear properties imply a huge potential of the nanocomposites in the development of nanophotonic devices, such as mode-lockers, optical limiters, or optical switches.

Ultrafast Nonlinear Excitation Dynamics of Black Phosphorus Nanosheets from Visible to Mid-Infrared.

The recent progress on black phosphorus makes it a promising candidate material for broadband nanophotonic devices, especially operating in the mid-infrared spectral region. Here, the excited carrier dynamics and nonlinear optical response of unoxidized black phosphorus nanosheets and their wavelength dependence were systematically studied from 800 nm to 2.1 µm. The wavelength-dependent relaxation times of black phosphorus nanosheets are determined to be 360 fs to 1.36 ps with photon energies from 1.55 to 0.61 eV. In a comparative study with graphene, we found that black phosphorus has a faster carrier relaxation in near- and mid-infrared region. With regard to nonlinear optical absorption, the response of black phosphorus significantly increases from near- to mid-infrared, and black phosphorus is also confirmed to be better as saturable absorber to MoS2 in infrared region.

Production of Highly Monolayer Enriched Dispersions of Liquid-Exfoliated Nanosheets by Liquid Cascade Centrifugation.

While liquid exfoliation is a powerful technique to produce defect-free nanosheets in large quantities, its usefulness is limited by broad nanosheet thickness distributions and low monolayer contents. Here we demonstrate liquid processing techniques, based on iterative centrifugation cascades, which can be designed to achieve either highly efficient nanosheet size-selection and/or monolayer enrichment. The resultant size-selected dispersions were used to establish quantitative metrics to determine monolayer volume fraction, as well as mean nanosheet size and thickness, from standard spectroscopic measurements. Such metrics allowed us to design and optimize centrifugation cascades to enrich liquid exfoliated WS2 dispersions up to monolayer contents of 75%. Monolayer-rich dispersions show relatively bright photoluminescence with narrow line widths (<35 meV) indicating the high quality of the nanosheets. The enriched dispersions display extinction spectra with distinct features, which also allow the direct estimation of monolayer contents.

Liquid exfoliation of solvent-stabilized few-layer black phosphorus for applications beyond electronics.

Few-layer black phosphorus (BP) is a new two-dimensional material which is of great interest for applications, mainly in electronics. However, its lack of environmental stability severely limits its synthesis and processing. Here we demonstrate that high-quality, few-layer BP nanosheets, with controllable size and observable photoluminescence, can be produced in large quantities by liquid phase exfoliation under ambient conditions in solvents such as N-cyclohexyl-2-pyrrolidone (CHP). Nanosheets are surprisingly stable in CHP, probably due to the solvation shell protecting the nanosheets from reacting with water or oxygen. Experiments, supported by simulations, show reactions to occur only at the nanosheet edge, with the rate and extent of the reaction dependent on the water/oxygen content. We demonstrate that liquid-exfoliated BP nanosheets are potentially useful in a range of applications from ultrafast saturable absorbers to gas sensors to fillers for composite reinforcement.

Saturable absorption behavior of free-standing graphene polymer composite films over broad wavelength and time ranges.

A comparative research on saturable absorption (SA) behavior dependence on wavelength and pulse duration was performed for graphene polymer composites. Free-standing graphene-polyvinyl alcohol (PVA) composite films were fabricated by using solution cast method in combination of liquid phase exfoliation. SA responses were observed by using an open-aperture Z-scan technique for 340 fs pulses at 1030 nm and 515 nm from a mode-locked fiber laser, and 6 ns pulses at 1064 nm and 532 nm from a Q-switched Nd:YAG laser. The graphene films possess better SA property, i.e., larger SA coefficient and figure of merit (FOM), and lower saturation intensity I(s), for ns pulses than that for fs pulses at the similar near infrared (NIR) wavelength. For fs pulses, the films show better SA response at 1030 nm than that at 515 nm. By employing slow and fast SA modelling, the excited state and ground state absorption cross sections were estimated to be ~10(-17) cm(2), and the ratio was ~0.6 at NIR for both fs and ns pulses.

Covalent modification of graphene oxide with carbazole groups for laser protection.

In the past decades, significant effort has been invested into the research and development of optical limiting materials and processes in order to develop practical solutions for the protection from laser beams. In this study, a new soluble graphene oxide based material (GO-Cz) has been synthesized through the covalent modification of graphene oxide (GO) with a carbazole derivative (Cz). The formation of an amido bond between the Cz group and GO has been confirmed by X-ray photoelectron and Fourier transform infrared spectroscopy. At the same concentration, both the nonlinear extinction coefficient and the imaginary third-order susceptibility were increased by a factor of ≈6.93 at 532 nm and ≈6.07 at 1064 nm relative to those of GO, as a result of the covalent grafting of the Cz moieties onto the GO surface. The GO-Cz dispersions exhibit a much better optical limiting performance than GO and GO/Cz blends at both 532 and 1064 nm due to the possible intramolecular electron-transfer between the GO and Cz moieties and the effective combination of the different nonlinear optical mechanisms.

Facile fabrication of wafer-scale MoS2 neat films with enhanced third-order nonlinear optical performance.

Wafer-scale MoS2 neat films with controllable thicknesses were successfully fabricated by vacuum filtering liquid-exfoliated MoS2 dispersions. The obtained MoS2 filtered thin films were systematically characterized by UV-Vis spectroscopy, Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, atomic force microscopy (AFM) and scanning electron microscopy (SEM). It was found that the fabricated scalable MoS2 films have a smooth surface and high optical homogeneity verified by AFM and a collimated 532 nm beam, respectively. We investigated the ultrafast nonlinear optical (NLO) properties of the filtered films by an open aperture Z-scan method using 515 and 1030 nm femtosecond laser pulses. Saturable absorption was observed at both 515 and 1030 nm with the figure of merit (FOM) values as ∼3.3 × 10(-12) esu cm and ∼3.4 × 10(-14) esu cm, respectively. The observation of ultrafast NLO performance of the MoS2 filtered films indicates that vacuum filtration is a feasible method for the fabrication of optical thin films, which can be expanded to fabricate other two-dimensional films from the corresponding dispersions. This easy film fabrication technology will greatly enlarge the application of graphene analogues including graphene in photonic devices, especially of MoS2 as a saturable absorber.

Broadband ultrafast nonlinear absorption and nonlinear refraction of layered molybdenum dichalcogenide semiconductors.

A series of layered molybdenum dichalcogenides, i.e., MoX2 (X = S, Se and Te), were prepared in cyclohexyl pyrrolidinone by a liquid-phase exfoliation technique. The high quality of the two-dimensional nanostructures was verified by transmission electron microscopy and absorption spectroscopy. Open- and closed-aperture Z-scans were employed to study the nonlinear absorption and nonlinear refraction of the MoX2 dispersions, respectively. All the three-layered nanostructures exhibit prominent ultrafast saturable absorption (SA) for both femtosecond (fs) and picosecond (ps) laser pulses over a broad wavelength range from the visible to the near infrared. While the dispersions treated with low-speed centrifugation (1500 rpm) have an SA response, and the MoS2 and MoSe2 dispersions after higher speed centrifugation (10,000 rpm) possess two-photon absorption for fs pulses at 1030 nm, which is due to the significant reduction of the average thickness of the nanosheets; hence, the broadening of band gap. In addition, all dispersions show obvious nonlinear self-defocusing for ps pulses at both 1064 nm and 532 nm, resulting from the thermally-induced nonlinear refractive index. The versatile ultrafast nonlinear properties imply a huge potential of the layered MoX2 semiconductors in the development of nanophotonic devices, such as mode-lockers, optical limiters, optical switches, etc.

A general strategy for hybrid thin film fabrication and transfer onto arbitrary substrates.

The development of thin film-based structures/devices often requires thin films to be transferred onto arbitrary substrates/surfaces. Controllable and non-destructive transfer method, although highly desired, remains quite challenging. Here we report a general method for fabrication and transfer of hybrid (ultra)thin films. The proposed solution-based in-situ transfer method shows not only its robust ability for thin film transfer onto arbitrary substrates but also its highly controlled and non-destructive characteristic. With a hole structure as the support, fully-stretched free-standing thin film is prepared. The successful transfer to a curved surface demonstrates the possibility for production of thin film-coated complex optical components. Ultrathin (35 nm) hybrid film transferred onto PET (50 µm thick) shows high transparency (>90% in visible range), conductivity (1.54 × 10(4) S/m), and flexibility (radius of curvature down to mm scale). The reported transfer method would provide a powerful route towards complex thin film-based structures/devices.

Controllable broadband nonlinear optical response of graphene dispersions by tuning vacuum pressure.

Nonlinear scattering, originating from laser induced solvent micro-bubbles and/or micro-plasmas, is regarded as the principal mechanism for nonlinear optical (NLO) response of graphene dispersions at ns timescale. In this work, we report the significant enhancement of NLO response of graphene dispersions by decreasing the atmospheric pressure, which has strong influence on the formation and growth of micro-bubbles and/or micro-plasmas. A modified open-aperture Z-scan apparatus in combination with a vacuum system was used to study the effect of vacuum pressure on the NLO property of graphene dispersions prepared by liquid-phase exfoliation technique. We show that the atmospheric pressure can be utilized to control and tune the nonlinear responses of the graphene dispersions for ns laser pulses at both 532 nm and 1064 nm. The lower the vacuum pressure was, the larger the NLO response was. In contrast, the NLO property of fullerene was found to be independent of the pressure change, due to its nature of nonlinear absorption. This work affords a simple method to distinguish the nonlinear scattering and absorption mechanisms for NLO nanomaterials.

Solvent effect on the nonlinear absorption of 5,10-A(2)B(2) meso substituted porphyrins.

The effect of the solvent on the nonlinear absorptive properties of two series of 5,10-A2B2 porphyrins was investigated with an open Z-scan technique in the ns time regime. The recorded responses, which varied between compounds and solvents, were fitted to a four-level model where the one-photon excited state absorption is followed by a two-photon process arising from the higher excited states. For most of the compounds the positive nonlinear absorption in toluene was stronger than that in DMF and chloroform. This was attributed to enhanced two-photon absorption in toluene. For DMF and chloroform the solvent effects were most likely to be compound specific. It was demonstrated that the high saturation intensity of two-photon absorption shifts the RSA/SA turnover into a higher fluence range, which is desirable for optical limiting applications. This saturation intensity of two-photon absorption varied between compounds and solvents. Additionally, nonlinear scattering contributed strongly to the open Z-scan responses for many compounds in chlorobenzene and chloroform-chlorobenzene solutions. This was associated with the photodegradation of chlorobenzene.

Nonlinear absorption properties of 5,10-A2B2 porphyrins--correlation of molecular structure with the nonlinear responses.

The nonlinear absorption properties of two series of novel free base and metalated meso 5,10-A2B2 substituted porphyrins, both bearing p-tolyl as an A substituent and TMS-ethynyl or bromine as a B substituent, were investigated with the open Z-scan technique at 532 nm in the ns time regime. Most of the compounds exhibited a transmission drop with increasing input fluence. This behavior is desirable for their applications in optical limiting. More complex responses: a drop in transmission followed by an increase in transmission or an increase in transmission followed by a transmission drop, with increasing input fluence, were detected for certain compounds. All of the recorded responses were successfully fitted with a four-level model with simultaneous two-photon absorption arising from the higher excited states (consecutive one- + one- + two-photon absorption). The TMS-ethynyl group was found to be a more efficient meso substituent in optical limiting than the bromine atom. Indium, lead and zinc complexes with TMS-ethynyl substituents were the strongest positive nonlinear absorbers amongst compounds studied which makes them the most interesting candidates for optical limiting application.

Modeling of nonlinear absorption of 5,10-A2B2 porphyrins in the nanosecond regime.

The nonlinear absorption (NLA) properties of free base and metalated porphyrins with a unique 5,10-A(2)B(2) substitution pattern were studied with open Z-scan technique at 532 nm in the nanosecond regime over a broad range of input fluence. The NLA responses were found to be dependent on structural features and the solvent used. In most cases, the character of the response differed from that typically observed for other porphyrins under similar experimental conditions (i.e., reverse saturable absorption, RSA), suggesting distinct photophysical properties. A series of models was considered in order to understand the NLA responses. Although the character of the responses varied between compounds and solvents, it was found that one model fits best all of the recorded responses. Thus, a four-level model with simultaneous two-photon absorption arising from the higher excited state is proposed (1 + 1 + 2 photon absorption).

The electrical stimulation of carbon nanotubes to provide a cardiomimetic cue to MSCs.

Once damaged, cardiac muscle has little intrinsic repair capability due to the poor regeneration potential of remaining cardiomyocytes. One method of overcoming this issue is to deliver functional cells to the injured myocardium to promote repair. To address this limitation we sought to test the hypothesis that electroactive carbon nanotubes (CNT) could be employed to direct mesenchymal stem cell (MSC) differentiation towards a cardiomyocyte lineage. Using a two-pronged approach, MSCs exposed to medium containing CNT and MSCs seeded on CNT based polylactic acid scaffolds were electrically stimulated in an electrophysiological bioreactor. After electrical stimulation the cells reoriented perpendicular to the direction of the current and adopted an elongated morphology. Using qPCR, an upregulation in a range of cardiac markers was detected, the greatest of which was observed for cardiac myosin heavy chain (CMHC), where a 40-fold increase was observed for the electrically stimulated cells after 14 days, and a 12-fold increase was observed for the electrically stimulated cells seeded on the PLA scaffolds after 10 days. Differentiation towards a cardioprogenitor cell was more evident from the western blot analysis, where upregulation of Nkx2.5, GATA-4, cardiac troponin t (CTT) and connexin43 (C43) was seen to occur. This was echoed in immunofluorescent staining, where increased levels of CTT, CMHC and C43 protein expression were observed after electrical stimulation for both cells and cell-seeded scaffolds. More interestingly, there was evidence of increased cross talk between the cells as shown by the pattern of C43 staining after electrical stimulation. These results establish a paradigm for nanoscale biomimetic cues that can be readily translated to other electroactive tissue repair applications.

In vitro characterization of an electroactive carbon-nanotube-based nanofiber scaffold for tissue engineering.

In an effort to reduce organ replacement and enhance tissue repair, there has been a tremendous effort to create biomechanically optimized scaffolds for tissue engineering applications. In contrast, the development and characterization of electroactive scaffolds has attracted little attention. Consequently, the creation and characterization of a carbon nanotube based poly(lactic acid) nanofiber scaffold is described herein. After 28 d in physiological solution at 37 °C, a change in the mass, chemical properties and polymer morphology is seen, while the mechanical properties and physical integrity are unaltered. No adverse cytotoxic affects are seen when mesenchymal stem cells are cultured in the presence of the scaffold. Taken together, these data auger well for electroactive tissue engineering.